Rallylog (post) Update #1 – Adding a wrist strap to the SparkFun Case

As I mentioned in my last post that just before I lost my mojo I ended up completing my build of 10 Rallylogs and testing at a live event.As these were handheld devices I decided to add a wrist strap to stop things from getting dropped and damaged at the checkpoints, especially as it can … Continue reading Rallylog (post) Update #1 – Adding a wrist strap to the SparkFun Case

Putting the Project into an Enclosure; Part 2 Machining the Case

In my previous post I described the design process I went through in selecting the right components from my Rallylog that would fit into the Sparkfun Project Case, all while mounted on a PCB. What follows is the process of getting the actual case machined with my Zenbot CNC machine. How am I going to … Continue reading Putting the Project into an Enclosure; Part 2 Machining the Case

Putting the Project into an Enclosure – Part 1

For the open Hardware Rallylog device I’ve been working on, I’d based my design around fitting into the handy Sparkfun Project Case and since most of my projects never get to the “enclosure” stage, they are either used bare PCB or thrown into anything that may provide some protection against the elements, such as the … Continue reading Putting the Project into an Enclosure – Part 1

Projects

Hardware Arduino Strobit Wireless Widget Wireless Widget Widget Mesh Rallylog Makecontroller CNC Picaxe CAD Eagle3D Parts